-
314010
Quick-action clamp, swivel unit +90°/-90° SWA39, fine worm drive
€ 698,00 Excl. VAT -
314015
Clamping set for swivel unit
€ 98,00 Excl. VAT -
314020
Quick-action clamp rotary and swivel unit clamp SWA39, with fine worm drive, 360°/indexed every 90°
€ 944,00 Excl. VAT -
314030
Quick-action rotary and swivel unit clamp SWA39 with fine worm drive
€ 1.248,00 Excl. VAT -
314050
Swivel table with M4 grid hole stepless adjustable from 0-90°
€ 369,00 Excl. VAT -
314055
Swivel table with quick action clamp SWA39 stepless adjustable from 0-90°
€ 377,00 Excl. VAT -
314100
Adapter plate SWA39 with quick-connection SWA5
€ 88,00 Excl. VAT -
314200
Adapter plate SWA39 with quick-connection SWA8.
€ 88,00 Excl. VAT -
314400
Quick-action clamp with 90° offset, SWA39
€ 185,00 Excl. VAT -
314440
SWA39 positioning table; X-Y, 360°-adjustment with fastening, stop and guidance in T-slot rail
€ 2.134,00 Excl. VAT -
314441
Fastening accessories M6 for article no. 314440 and 274750, suitable for t-slot DIN 508, size 8
€ 15,00 Excl. VAT -
314442
Fastening accessories M8 for article no. 314440 and 274750, suitable for t-slot DIN 508,
€ 15,00 Excl. VAT -
314450
Quick-action clamp with carriage guide adjustment range max. 25 mm, mounted on SWA39
€ 592,00 Excl. VAT -
314460
Quick-action clamp with cross table adjustment range each max 25 mm, mounted on SWA39
€ 1.227,00 Excl. VAT -
314500
Adapter plate, cross interface with SWA39 quick-change adapter
€ 73,00 Excl. VAT -
314620
Quick-change mount SWA5, T-slot
€ 85,00 Excl. VAT -
314900
Rotary swivel mount for optical measurements, with raster and
€ 567,00 Excl. VAT -
314910
Adapter SWA39 for rotary swivel mount
€ 85,00 Excl. VAT -
314920
Rotary swivel with SWA39 with raster and
€ 621,00 Excl. VAT -
318100
Stop unit 75 mm for vices overhang 20 mm
€ 46,00 Excl. VAT -
318110
Stop unit 150 mm for vices overhang 20 mm
€ 46,00 Excl. VAT -
318200
Stop unit 75 mm for vices overhang 40 mm
€ 54,00 Excl. VAT -
318210
Stop unit 150 mm for vices overhang 40 mm
€ 56,00 Excl. VAT -
318250
Stop unit for vices 25/35mm connection M5/stop Ø 5 mm
€ 81,00 Excl. VAT -
319300
Support domes with 90° centre point, Ø 12 mm
€ 17,00 Excl. VAT -
319400
Support dome R4x15 mm, Ø 8 mm
€ 17,00 Excl. VAT -
319500
Support dome R4x20 mm, Ø 8 mm
€ 17,00 Excl. VAT -
320500
Clamping support with pull-down jaw and straight fixed stop, 67x25x27 mm, 2.5 mm adjustment
€ 194,00 Excl. VAT -
320600
Clamping support with pull-down jaw and radial fixed stop, 65x25x36 mm, 2.5 mm adjustment
€ 225,00 Excl. VAT -
322001
Small screw jack set adjustable basic rails with support.
€ 100,00 Excl. VAT -
322005
Screw frame set with spring clamp adjustable basic rails with support.
€ 175,00 Excl. VAT -
322006
Small screw jack set with spring clamp Adjustable basic rails with support.
€ 165,00 Excl. VAT -
322010
Basic rail M10, 60 mm 6 mm slot width
€ 58,00 Excl. VAT -
322050
Basic rail M6, 50 mm adjustment range, 81 mm total length
€ 61,00 Excl. VAT -
322051
Basic rail M6, 50 mm adjustment range, 131 mm total length
€ 75,00 Excl. VAT -
322200
Extension element 25 mm, M10
€ 17,00 Excl. VAT -
322250
Extension element M6, 15 mm
€ 15,00 Excl. VAT -
322300
Extension element 35 mm, M10
€ 18,00 Excl. VAT -
322350
Extension element M6, 25 mm
€ 17,00 Excl. VAT -
322400
Extension element 50 mm, M10
€ 20,00 Excl. VAT -
322450
Extension element M6, 50 mm
€ 19,00 Excl. VAT -
322600
Formed support M10x30, with 90° cone point 15 mm adjustment range
€ 33,00 Excl. VAT -
322700
Formed support M10, with 5 mm dome radius adjustment range 25 mm
€ 27,00 Excl. VAT -
322750
Formed support M6, with 3 mm dome radius adjustment range 15 mm, total length 40 mm
€ 21,00 Excl. VAT -
323-250-30
Digital Disc Micrometer IP65 0-25mm, Disk=20mm
€ 851,00 Excl. VAT -
323-251-30
Digital Disc Micrometer IP65 25-50mm, Disk=20mm
€ 948,00 Excl. VAT -
323000
Self-aligning pad M10x30, ± 15° adjustment range 15 mm
€ 63,00 Excl. VAT -
323050
Self-aligning pad M6 steel, ± 10° adjustment range 15 mm, total length 35 mm
€ 68,00 Excl. VAT -
323060
Self-aligning pad M6 plastic, ± 10° adjustment range 15 mm, total length 35 mm
€ 50,00 Excl. VAT -
323070
Magnetic pin M6, Ø 6mm, 5N adjustment range 15 mm, total length 42 mm
€ 35,00 Excl. VAT -
323400
V-support 40 mm,120°, SWA8 span Ø 2-60 mm
€ 88,00 Excl. VAT -
323500
V-support 8 mm,120°, SWA8 span Ø 2-60 mm
€ 90,00 Excl. VAT -
324000
Extension element for clamping supports, 50 mm M6 mounting thread
€ 129,00 Excl. VAT -
324100
Extension element for clamping supports, 100 mm M6 mounting thread
€ 148,00 Excl. VAT -
324600
Extension element for clamping supports, 88-112 mm M6 mounting thread
€ 254,00 Excl. VAT -
325100
Intermediate plate, 117×117 mm slot quantity 3, for x/y adjustment
€ 269,00 Excl. VAT -
326100
T-slot block 6 mm with 2 threads M6x50 mm, length 60 mm
€ 28,00 Excl. VAT -
326400
T-slot block with female thread M6, 6 mm
€ 21,00 Excl. VAT -
326500
Cylindrical pins Ø 4 mm for 50 mm vice V-block 120° support surface, length 25 mm,
€ 113,00 Excl. VAT -
326600
Cylindrical pins Ø 5 mm for 80/100 mm vice V-block 120° support surface, 30mm length, 2 pairs
€ 119,00 Excl. VAT -
326610
Cylindrical pins Ø 5 mm for 80/100 mm vice V-block 120° support surface, 35mm length, 2 pairs
€ 123,00 Excl. VAT -
326650
Cylindrical pins Ø 6 mm for 125 mm vice, V-block 120° support surface, 30mm length, 2 pairs
€ 150,00 Excl. VAT -
326800
T-slot block with male thread M6
€ 26,00 Excl. VAT -
328500
Handle set for base plate L 150 mm, H 45 mm to make easier to carry, attaches to a T-slot
€ 158,00 Excl. VAT -
329000
Precision three-jaw chuck 34 mm, SWA39 stainless steel, with reversible clamping jaws
€ 1.061,00 Excl. VAT -
329010
Precision three-jaw chuck 34 mm, SWA5 stainless steel, with reversible clamping jaws
€ 1.004,00 Excl. VAT -
329030
Precision three-jaw chuck 34 mm, 3xM2 stainless steel, with reversible jaws
€ 911,00 Excl. VAT -
329400
Quick-change mount M10, SWA5 adjustment range 25 mm
€ 40,00 Excl. VAT -
329500
Quick-change mount M10x40, SWA8 adjustment range 25 mm
€ 40,00 Excl. VAT -
329700
Precision three-jaw chuck 65 mm, SWA39 with pins Ø 2 mm and reversible clamping jaws
€ 729,00 Excl. VAT -
329705
Precision three-jaw chuck 50 mm, SWA39 with pins Ø 2 mm and reversible clamping jaws
€ 713,00 Excl. VAT -
329710
Precision three-jaw chuck 65 mm, 3xM4 with pins Ø 2 mm and reversible clamping jaws
€ 675,00 Excl. VAT -
329711
Precision three-jaw chuck 65 mm, 3xM4 with pins Ø 2 mm and reversible clamping jaws
€ 675,00 Excl. VAT -
329715
Precision three-jaw chuck 65 mm, MK 2 with pins Ø 2 mm and reversible clamping jaws
€ 942,00 Excl. VAT -
329717
Precision three-jaw chuck 65 mm, MK 2 with AM with pins Ø 2 mm and reversible clamping jaws
€ 942,00 Excl. VAT -
329718
Precision three-jaw chuck 65 mm, SWA5 with pins Ø 2 mm and reversible clamping jaws
€ 773,00 Excl. VAT -
329720
Precision three-jaw chuck 50 mm, 3xM4 with pins Ø 2 mm and reversible clamping jaws
€ 661,00 Excl. VAT -
329725
Precision three-jaw chuck 50 mm, MK 2 with pins Ø 2 mm and reversible clamping jaws
€ 917,00 Excl. VAT -
329728
Precision three-jaw chuck 50 mm, SWA5 with pins Ø 2 mm and reversible clamping jaws
€ 661,00 Excl. VAT -
329730
Soft jaws for three-jaw chuck 50 mm/65 mm
€ 390,00 Excl. VAT -
329731
#N/B
€ 390,00 Excl. VAT -
329734
System-jaw set BF65 and BF50
€ 500,00 Excl. VAT -
329740
Precision four-jaw chuck 65 mm, SWA39 with pins Ø 2 mm and reversible clamping jaws
€ 1.250,00 Excl. VAT -
329745
Precision four-jaw chuck 65 mm/3xM4 with pins Ø 2 mm and reversible clamping jaws
€ 1.209,00 Excl. VAT -
329746
Precision four-jaw chuck 65 mm, MK 2 with pins Ø 2 mm and reversible clamping jaws
€ 1.438,00 Excl. VAT -
329747
Precision four-jaw chuck 65 mm, MK 2 with AM with pins Ø 2 mm and reversible clamping jaws
€ 1.438,00 Excl. VAT -
329750
Precision four-jaw chuck 65 mm, SWA5 with pins Ø 2 mm and reversible clamping jaws
€ 1.328,00 Excl. VAT -
329760
Soft jaws for four-jaw chuck Ø 65 mm
€ 488,00 Excl. VAT -
329770
Attachment kit for jaw chucks 50 mm and 65 mm compatible to 329710; 329720; 329745 SWA39
€ 90,00 Excl. VAT -
33012
Firm Joint Inside Caliper 12″/300mm
€ 17,16 Excl. VAT
This product has been discontinued. -
33012R
R/P Firm Joint Inside Caliper 12″/300mm
€ 19,32 Excl. VAT -
330310
Precision three-jaw chuck 160 mm, SWA39 with pins Ø 4 mm and reversible clamping jaws
€ 1.961,00 Excl. VAT -
330312
Block jaw for chuck 160 mm unhardened, set with 3 jaws
€ 192,00 Excl. VAT -
330314
System-jaw for chuck 160 mm 3x pin hole Ø 4 mm and 2xM6
€ 263,00 Excl. VAT -
330315
Precision three-jaw chuck 160 mm, 4xM6 with pins Ø 4 mm and reversible clamping jaws
€ 1.915,00 Excl. VAT -
330506
Quick-action clamp SWA39 with 61.5 mm extension element, fastening screw M6
€ 227,00 Excl. VAT -
330508
Quick-action clamp SWA39 with 61.5 mm extension element, fastening screw M8
€ 227,00 Excl. VAT -
330510
Quick-action clamp SWA39 with 61.5 mm extension element, fastening screw M10
€ 227,00 Excl. VAT -
330512
Quick-action clamp SWA39 with 61.5 mm extension element, fastening screw M12
€ 227,00 Excl. VAT -
330520
Quick-action clamp SWA39 with 61.5 mm extension element, for T-slot
€ 261,00 Excl. VAT