76390300120

Description

Digitalpassameter 3903

Digital micrometer with turnable LED display and tolerance mode, device temperature monitoring, USB interface and optional software

The digital passameter 3903 has a lightweight measuring body with a novel inductive measuring system with 4 mm completely fine measuring range. The gauging force of the measuring system can be selected from approx. 0.7 to approx. 2.0 N as a factory setting. Temperature fluctuations on the measuring body are recorded by an integrated sensor and signalled when a limit value is exceeded. Measuring body and display unit can be operated separately thanks to the modular structure. This simplifies series measuring at the workstation and does not add any disruptive moments into the measurement. Measuring sensor and display are then connected with an optional cable and can be positioned freely. In addition to digital numbers in the display module, there are also precision indicator bars and colour LEDs available for “good” – “bad” selection. The configuration is done with device keys or additional software. Thus, it is also possible to activate and set functions such as preset value, bar areas, LED colours, measuring modes or password.

Short description
• Standard: DIN 863 | DAkkS calibrated acc. to DIN EN ISO/IEC 17025:2018
• Measuring range: 0 – 12 mm (depending on version)
• Resolution: < 0,0001 mm (< 0,1 µm) / unit change possible mm/inch
• Display: LCD display (turnable) with tolerance deviation, device temperature monitoring
• Data interface: Triple I (USB cable or wireless)
• Optionally available: software, separation of measuring body and display

Application
• for measuring small, filigree components
• for checking round and flat test objects
• measuring body and display unit are separable
• for easy series testing on the machine or at the workplace